logo

পণ্যের বিবরণ

Created with Pixso. বাড়ি Created with Pixso. পণ্য Created with Pixso.
ইভি সংযোগকারী পরীক্ষার সরঞ্জাম
Created with Pixso.

Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester

Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester

ব্র্যান্ড নাম: Sinuo
মডেল নম্বর: SNQC1017A
MOQ: 1
অর্থ প্রদানের শর্তাবলী: টি/টি
সরবরাহের ক্ষমতা: প্রতি মাসে 10 সেট
বিস্তারিত তথ্য
উৎপত্তি স্থল:
চীন
সাক্ষ্যদান:
Calibration Certificate (Cost Additional)
পরিমাপ পরিসীমা:
0 থেকে ±2000 Pa
চাপ প্রতিরোধের:
1 এমপিএ
অপারেটিং তাপমাত্রা:
-5°C থেকে 40°C
স্টোরেজ তাপমাত্রা:
-20°C থেকে 70°C
প্যারামিটার চ্যানেল:
64টি চ্যানেল (1-64)
পরীক্ষা চক্র সেটিং:
0-999s
আর্দ্রতা:
<80% RH, নন-কন্ডেন্সিং
ওজন:
প্রায় 40 কেজি
প্যাকেজিং বিবরণ:
রপ্তানি প্যাকিং
যোগানের ক্ষমতা:
প্রতি মাসে 10 সেট
পণ্যের বর্ণনা


 

Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester

 


Product Overview


 

The Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester is a high-precision leak detection solution designed for EV charging gun components and water pipes. It performs airtightness and pressure-drop tests based on IPX7 standards to ensure product reliability and identify defective incoming materials before assembly.

This tester provides stable pressure output, micro-leakage monitoring, automatic evaluation, and data recording—ideal for EV charger manufacturers, charging gun assembly lines, and laboratory verification departments.

 

Technical Parameters


 

Technical Item

Specification

Display Resolution 0–4 decimal places adjustable
Measurement Range 0 to ±2000 Pa
Pressure Resistance 1 MPa
Accuracy ±0.1% FS
Display Resolution 0–4 decimal places adjustable
Overpressure Resistance 3× full-scale pressure
Accuracy ±0.1% FS
Test Pressure Units kPa, kg/cm², PSI, mbar, bar, Torr, mmH₂O, mmHg
Leakage Units Pa, Pa/s, mL/s, mL/min, L/min, Pa·m³/s
Parameter Channels 64 channels (1–64)
Test Cycle Setting 0–999 seconds
CPU 32-bit processor
Power Supply AC 220V ±10%, 50 Hz
Required Air Source Clean, dry air ≥ 600 kPa
Operating Temperature –5°C to 40°C
Storage Temperature –20°C to 70°C
Humidity < 80% RH, non-condensing

Details


 

 Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester 0Electric Vehicle Charging Connector & Water Pipe Air Tightness Tester 1